Discontinuous filament winding machines refers to filament winding equipment which use a discontinuous mandrel.
These machines are commonly used for the production of chemical resistance or high pressure pipes, and pressure vessels for LPG, CNG and CHG.
The equipment runs on CADWIND software program so it’s possible to produce 2-axis to 6-axis pressure tanks including ultra-high pressure hydrogen gas tanks.
Division | Contents |
---|---|
Speed Range(rpm) | 0~200 |
Diameter(mm) | 30 ~ 4,000 |
Length(mm) | 500 ~ 18,000 |
Spindle(ea) | 1 ~ 5 |
Axis | 2 ~ 6 |
CADWIND, a software for filament winding of composite materials, is a program designed to produce products under the filament winding conditions of volume by calculating
the fiber trajectory and winding pattern of filament winding.
1) CADWIND is a physical modeling including friction modeling, which simulates and realizes the phenomena occurring in the actual winding machine.
2) Calculate winding patterns for line symmetry and non-symmetry
3) Provides a wide range for users to wind
4) The fiber realizes slip removal from the winding surface
5) Create virtual winding prototype model
6) Calculation algorithm
: analytical formulas + physical modeled non-geodesic winding
Division | Contents |
---|---|
Speed Range(rpm) | 0 ~ 50 |
Maximum Diameter(mm) | 2,500 |
Maximum Mandrel Weight(kg) | 10,000 |
Usable Travel(mm) | 1,000 ~ 6,000 |
Axis | 3 ~ 6 |
Division | Contents |
---|---|
Speed Range(rpm) | 0 ~ 50 |
Maximum Diameter(mm) | 3,000 |
Maximum Mandrel Weight(kg) | 30,000 |
Usable Travel(mm) | 3,000 ~ 18,000 |
Axis | 3 ~ 6 |
Kimtec Co., Ltd.
Business Number : 106-88-01135
TEL : 82+55-802-7001
FAX : 82+55-802-8805
E-Mail : office@kimtec.co.kr
Address : 114, Saposandanjungang-ro, Miryang-si, Gyeongnam, South Korea